Displaying And Debugging Mac Address Tables; Resetting Mac Addresses; Mac Address Table Management Configuration Example - 3Com 8807 Configuration Manual

Displaying and
Debugging MAC
Address Tables
Resetting MAC
Addresses
MAC Address Table
Management
Configuration
Example
After the above configuration, execute the display command in any view to
display the running of the MAC address table configuration, and to verify the
effect of the configuration.
Table 102 Display and debug MAC address tables
Operation
Display the information in the
MAC address table
Display the aging time of
dynamic entries in MAC
address table
After configuration, use the reset mac-address command in user view to reset
the configured mac-address table information.
Table 103 Reset MAC addresses
Operation
Reset mac-address table information
Network requirements
The user logs into the switch through the Console port to configure the address
table management. It is required to set the address aging time to 500s and add a
static address 00e0-fc35-dc71 to Ethernet2/1/2 in VLAN1.

Displaying and Debugging MAC Address Tables

Command
display mac-address [ mac-addr [ vlan vlan-id ] | [ static |
dynamic ] [ interface interface-type interface-number ] [ vlan
vlan-id ] [ count ] ]
display mac-address aging-time
Command
reset mac-address { all | dynamic | static |
interface { interface-type interface-number} | vlan
vlan-id }
119