3Com 8807 Configuration Manual page 205

Traffic Redirection
Configuration Example
Table 178 Modified CoS-> Conform-Level mapping table
CoS Value
6
7
4 Define the DSCP + Conform-Level -> Service parameter mapping table.
# Define the DSCP + Conform-Level -> Service parameter mapping table. Allocate
a set of service parameters for the packets from PC1 according the mapping table
for DSCP 63.
[SW8800] qos conform-level 0
[3Com-conform-level-0] dscp 63 : 32 4 4 4 0
The modified DSCP + Conform-Level -> Service parameter mapping table:
Table 179 Modified DSCP + Conform-Level -> Service parameter mapping table
DSCP CL
63 0
5 Re-allocate service parameters for the packets from PC1.
# Re-allocate service parameters for the packets from PC1.
[3Com-GigabitEthernet7/1/1] traffic-priority inbound ip-group 2000
remark-policed-service dscp 63
Network requirements
Forward the packets sent from PC1 (IP 1.0.0.1) during the time range from 8:00 to
18:00 every day to the address 2.0.0.1.
Network diagram
Figure 50 Network diagram for traffic redirection configuration
GE7/1/1 GE7/1/1
VLAN2, VLAN2,
1.0.0.1/8 1.0.0.1/8
PC1 PC1
Configuration procedure
1 Define the time range.
# Define the time range from 8:00 to 18:00.
Drop-precedence
0
0
Policed- Policed- Policed-
DSCP exp 802.1p
32 4 4
GE7/1/8 GE7/1/8
GE7/1/2 GE7/1/2
VLAN3, VLAN3,
2.0.0.1/8 2.0.0.1/8
PC2 PC2
QoS Configuration Example
Policed-Drop
Policed-Localprec
Precedence
4 0
205