3Com 8807 Configuration Manual page 797

Network diagram
Figure 185 Network diagram for FTP configuration
Switch Switch Switch
Configuration procedure
1 Configure FTP server parameters on the PC: a user named as switch, password
hello, read & write authority over the Switch directory on the PC. No further
details are provided here
2 Configure the switch
# The switch has been configured with a Telnet user named as user, as 3-level user,
with password hello, requiring username and password authentication.
# Use the telnet command to log into the switch.
<SW8800>
c
CAUTION: If the Flash Memory of the switch is not enough, you need to first
delete the existing programs in the flash memory and then download the new
ones to the memory.
# Enter the corresponding command in user view to establish FTP connection.
Then enter correct username and password to log into the FTP server.
<SW8800> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:*****
230 Logged in successfully
[ftp]
# Use the get command to download the switch.app and boot.app files from the
FTP server to the flash directory on the FTP client.
[ftp] get switch.app
[ftp] get boot.app
# Use the quit command to release FTP connection and return to user view.
[ftp] quit
<SW8800>
# Upgrade the BootROM of main module 0.
Device Management Configuration Example
Network Network
PC PC
797