Traffic Classification-Based Nested Vlan Configuration - 3Com 8807 Configuration Manual

850 C 76: Q Q C
HAPTER IN
Traffic
Classification-Based
Nested VLAN
Configuration
Configuration
prerequisites
Configuration procedure
ONFIGURATION
Table 814 Configure VLAN VPN for PVC
Configuration step
Enter PVC view
Enable VLAN VPN for PVC
ACLs and corresponding rules to be applied already exist.
■
The VLANs to be specified by the nested-vlanid argument already exist.
■
Table 815 Configure traffic classification-based nest vlan
Configuration step
Enter system view
Enter Ethernet port view or port group view
Set outer VLAN tags
for the packets
matching the ACL
rules
Command
pvc { name pvc-name [ vpi/vci
] | vpi/vci }
vlan-vpn enable
Command
system-view
interface {
interface-type
interface-number |
interface-name } or
port-group index
traffic-redirect
inbound ip-group {
Deliver a Layer 3 acl-number | acl-name
traffic classification } [ rule rule [
rule system-index index ]
] nested-vlan
nested-vlanid
traffic-redirect
inbound ip-group {
acl-number | acl-name
Deliver both Layer 2 } [ rule rule ]
and Layer 3 traffic link-group {
classification rules acl-number | acl-name
} [ rule rule ]
nested-vlan
nested-vlanid
traffic-redirect
inbound link-group
Deliver a Layer 2 { acl-number |
traffic classification acl-name } [ rule rule [
rule system-index index ]
] nested-vlan
nested-vlanid
Description
-
By default, VLAN VPN is
disabled by default.
Description
-
-
Make sure the VLAN
which the
nested-vlanid
argument specifies
exists to prevent
otherwise the packets
from being discarded.