3Com 8807 Configuration Manual page 802

802 C 70: FTP&TFTP C
HAPTER
c
Enabling/Disabling FTP
Server
Configuring the FTP
Server Authentication
and Authorization
ONFIGURATION
The configuration of the switching as FTP server.
Table 753 Configuration of the switch as FTP server
Device Configuration
Start FTP server.
Switch
Configure authentication and
authorization for FTP server.
Configure running parameters
for FTP server.
Log into the switch from FTP
PC
client.
CAUTION: The prerequisite for normal FTP function is that the switch and PC are
reachable.
You can use the following commands to enable/disable the FTP server on the
switch. Perform the following configuration in system view.
Table 754 Enable/disable FTP Server
Operation
Enable the FTP server
Disable the FTP server
FTP server supports multiple users to access at the same time. A remote FTP client
sends request to the FTP server. Then, the FTP server will carry out the
corresponding operation and return the result to the client.
By default, FTP server is disabled.
The authorization information of FTP server includes the path to the desired
directory for FTP users. The FTP server service is available only for the authenticated
and authorized users. The authorization information of FTP server includes the top
working directory provided for FTP clients. You can use the following commands to
configure FTP server authentication and authorization.
Perform the following configuration in corresponding view.
Table 755 Configure the FTP Server Authentication and Authorization
Operation
Create new local FTP user and enter local user
view (in System view)
Default Remarks
You can view the
FTP server is configuration information of
disabled FTP server with the display
ftp-server command
Configure username,
- password and authorized
directory for FTP users
Configure timeout time
-
value for FTP server.
- -
Command
ftp server enable
undo ftp server
Command
local-user { username | multicast [ domain
domain-name ] ipaddress |
password-display-mode { auto |
cipher-force } }