In the Layer 2 aggregate interfaces view, you can't configure the MAC Learning Limit.
When a port is the member of the aggregation group, in Ethernet port view, you can't configure the
MAC Learning Limit
Displaying and Maintaining MAC Address Table
Display MAC address table
Display the aging timer for
dynamic MAC address entries
Display MAC address statistics
MAC Address Table Configuration Example
Log onto your device from the Console port to configure MAC address table management as follows:
Set the aging timer to 500 seconds for dynamic MAC address entries.
Add a static entry 000f-e235-dc71 for port GigabitEthernet 1/0/1 in VLAN 1.
# Add a static MAC address entry.
[Sysname] mac-address static 000f-e235-dc71 interface gigabitethernet 1/0/1 vlan 1
# Set the aging timer for dynamic MAC address entries to 500 seconds.
[Sysname] mac-address timer aging 500
# Display the MAC address entry for port GigabitEthernet 1/0/1.
[Sysname] display mac-address interface gigabitethernet 1/0/1
1 mac address(es) found
Use the command...
blackhole [ vlan vlan-id ]
[ count ]
[ mac-address [ vlan vlan-id ] |
[ dynamic | static ] [ interface
interface-number ] [ vlan
vlan-id ] [ count ] ]
Available in any view