Cleaning Activities; Cleaning Of The Controller Cabinet - ABB OmniCore E10 Product Manual

4.3 Cleaning activities

4.3.1 Cleaning of the controller cabinet

Required equipment
Equipment, etc.
Vacuum cleaner
Cleaning considerations
This section specifies some special considerations when cleaning the controller.
Product manual - OmniCore E10
3HAC079399-001 Revision: C
• Always use ESD protection.
• Always use cleaning equipment as specified above. Any other cleaning
equipment may shorten the life of paint work, rust inhibitors, signs, or labels.
• Always make sure that all protective covers are fitted to the controller before
cleaning.
• Never remove any covers or other protective devices when cleaning the
outside of the controller.
• Never use compressed air or spray with a high pressure cleaner.
• Never leave the door open when cleaning the exterior.
© Copyright 2019-2022 ABB. All rights reserved.
4.3.1 Cleaning of the controller cabinet
Note
ESD protected
4 Maintenance
107