Xerox ColorQube 9303 Series Service Manual page 1699

• Machine Status: to access status information on the machine
• Job Status: to access information on the job queues
• Features: to access the Copy, Fax etc. features soft buttons
• Power Saver: puts the machine into Low Power mode or reboot
Status LEDs
The Status LEDs indicate active functionality, refer to
Table 3 LED function
LED Function
1 Feature path selected
2 Job status path selected
3 Machine status path selected
4 Help mode
5 Interrupt mode
6 Power saver key
The arrangement of control panel hard buttons is illustrated in the following figures.
Control Panel Left
Figure 3 illustrates the functions available on the left side of the control panel.
Figure 3 Control panel left
ColorQube® 9303 Family
Table 3.
Color
Blue
Blue
Blue
Green
Green
Green
Control Panel Right
Figure 4 shows the controls located on the right side of the control panel.
Control Panel Display
The touch-sensitive control panel is the primary system interface.
the display. The display is divided into pathways, as illustrated in the following sub-sections. To
access the tools option it is necessary to log in as an administrator. The default screen dis-
played is set in Screen Defaults of the Tools area. Different feature menus are selected with
the hard buttons. Refer to GP 5
February 2013
8-5
Figure 4 Control panel right
Figure 5
Customer Administration Tools.
Principles of Operation
illustrates areas of