User Interface 1 - Dürkopp Adler 806N-111 Operating Instructions Manual

You automatically go to this selection window by selecting a pocket mode.
The identification code of the transfer plate is displayed here (4), see also
( p. 40). All pocket seam programs (1) are listed correspondingly.
You can select here the seam program to be used for sewing.

5.2.4 User interface 1

Fig. 54: User interface 1
(1) - Display pocket seam configuration
(2) - Set global parameters
(3) - Exit user interface 1
You go to this user interface by selecting the seam program. Here you can
view the seam shape and how the pocket is to be sewed on and make
various settings.
Setting options on user interface 1
68
①
②
(go to User interface 2)
(go to Start screen)
Button
Resetting the piece counter,  p. 80.
The piece counter indicates the number of sewn-on pockets.
Setting the bobbin counter,  p. 80.
The bobbin counter indicates the amount of thread still on
the bobbin and opens the bobbin change menu.
Enabling bundle removal,  p. 82.
Allows the finished sewn parts to be removed from the
stacker.
(4) - Select setting options
(5) - Software version number
Function
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Programming
⑤
④
③