Tektronix KEITHLEY SourceMeter 2606B Reference Manual page 516

Model 2606B System SourceMeter® Instrument Reference Manual
lan.status.subnetmask
This attribute contains the LAN subnet mask that is presently in use by the LAN interface.
Type TSP-Link accessible
Attribute (R) Yes
Usage
mask = lan.status.subnetmask
mask
Details
Use this attribute to determine the present operating state of the LAN. This attribute returns the
present LAN subnet mask value if the LAN is manually configured, or when DLLA or DHCP is used.
Example
print(lan.status.subnetmask)
Outputs the subnet mask of the instrument that is presently in use, such as:
255.255.255.0
Also see
lan.config.subnetmask
lan.timedwait
This attribute contains the LAN timed-wait state interval.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
timeout = lan.timedwait
lan.timedwait = timeout
timeout
Details
This attribute controls the amount of time that resources are allocated to closed TCP connections.
When a TCP connection is closed, the connection is put in a timed-wait state and resources remain
allocated for the connection until the timed-wait state ends. During the timed-wait interval, the
instrument processes delayed packets that arrive after the connection is closed.
Use this attribute to tailor the timed-wait state interval for the instrument.
Example
lan.timedwait = 30
Also see
lan.restoredefaults()
2606B-901-01 Rev. C November 2021
Affected by
Not applicable
A string specifying the subnet mask in dotted decimal notation
(on page 15-133)
Affected by
LAN restore defaults
The LAN timed-wait state interval in seconds
Set the amount of time resources are allocated to TCP
connection to 30 s.
(on page 15-136)
Section 15: TSP command reference
Where saved Default value
Not applicable Not applicable
Where saved Default value
Nonvolatile memory 20 (20 s)
15-143