Tektronix KEITHLEY SourceMeter 2606B Reference Manual page 504

Model 2606B System SourceMeter® Instrument Reference Manual
lan.config.ipaddress
This command specifies the LAN IP address.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
ipAddress = lan.config.ipaddress
lan.config.ipaddress = "ipAddress"
ipAddress
Details
This command specifies the LAN IP address to use when the LAN is configured using the manual
configuration method. This setting is ignored when DLLA or DHCP is used.
This attribute does not indicate the actual setting that is presently in effect. Use the
lan.status.ipaddress attribute to determine the present operating state of the LAN.
Example
ipaddress = lan.config.ipaddress
Retrieves the presently set LAN IP address.
Also see
lan.restoredefaults()
lan.status.ipaddress
lan.config.method
This attribute contains the LAN settings configuration method.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
method = lan.config.method
lan.config.method = method
method
2606B-901-01 Rev. C November 2021
Affected by
LAN restore defaults
LAN IP address; must be a string specifying the IP address in dotted decimal notation
(on page 15-136)
(on page 15-139)
Affected by
LAN restore defaults
The method for configuring LAN settings; it can be one of the following values:
▪
0 or lan.AUTO: Selects automatic sequencing of configuration methods
▪
1 or lan.MANUAL: Use only manually specified configuration settings
Section 15: TSP command reference
Where saved Default value
Nonvolatile memory "192.168.0.2"
Where saved Default value
Nonvolatile memory 0 (lan.AUTO)
15-131