Tektronix KEITHLEY SourceMeter 2606B Reference Manual page 502

Model 2606B System SourceMeter® Instrument Reference Manual
Example
print(lan.config.dns.hostname)
Also see
lan.config.dns.dynamic
lan.restoredefaults()
lan.config.dns.verify
This attribute defines the DNS host name verification state.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
state = lan.config.dns.verify
lan.config.dns.verify = state
state
Details
When this is enabled, the instrument performs DNS lookups to verify that the DNS host name
matches the value specified by lan.config.dns.hostname.
Example
print(lan.config.dns.verify)
Outputs the present DNS host name verification state.
If it is enabled, the output is:
1.00000e+00
Also see
lan.config.dns.hostname
lan.restoredefaults()
lan.config.duplex
This attribute defines the LAN duplex mode.
Type TSP-Link accessible
Attribute (RW) Yes
2606B-901-01 Rev. C November 2021
(on page 15-127)
(on page 15-136)
Affected by
LAN restore defaults
DNS hostname verification state:
▪
1 or lan.ENABLE: DNS host name verification enabled
▪
0 or lan.DISABLE: DNS host name verification disabled
(on page 15-128)
(on page 15-136)
Affected by
LAN restore defaults
Section 15: TSP command reference
Outputs the present dynamic DNS host name.
Where saved
Nonvolatile memory
Where saved
Nonvolatile memory
Default value
1 (lan.ENABLE)
Default value
1 (lan.FULL)
15-129