Selector Mechanism; Overview - Selector Mechanism - Audi Q7 2007 Repair Manual

Audi Q7 2007 ➤
8-Speed Automatic Transmission 0C8 - Edition 08.2017
2

Selector Mechanism

⇒ "2.1 Overview - Selector Mechanism", page 26
⇒ "2.2 Gearshift Mechanism, Checking", page 27
⇒ "2.3 Selector Mechanism, Performing Emergency Release",
page 29
2.1

Overview - Selector Mechanism

WARNING
There is a risk of injury and accident from accidentally engag‐
ing a gear when the engine is running.
♦ Before performing work with the engine running, place the
selector lever in the "P" position and engage the parking
brake.
1 - Selector Lever Cable
❑ Do not bend.
❑ Refer to
⇒ "5 Selector Lever Ca‐
ble", page 60 .
2 - Locking Plate
❑ Refer to
⇒ "5 Selector Lever Ca‐
ble", page 60 .
3 - Selector Lever Cable Bolts
❑ Refer to
⇒ "5 Selector Lever Ca‐
ble", page 60 .
4 - Clamp
❑ Refer to
⇒ "3 Selector Lever
Handle", page 32
5 - Selector Lever Boot
❑ Refer to
⇒ "3.3 Selector Lever
Boot, Removing from
Selector Lever Handle",
page 38 .
6 - Trim Ring
❑ Refer to
⇒ "3.3 Selector Lever
Boot, Removing from
Selector Lever Handle",
page 38 .
7 - Selector Lever Handle
❑ Refer to
⇒ "3 Selector Lever
Handle", page 32
8 - Selector Lever Transmission Range Position Display Unit - Y26-
❑ Removing and installing. Refer to
⇒ "3.4 Selector Lever Transmission Range Position Display Unit Y26 , Removing and Installing",
page 39 .
26
Rep. Gr.37 - Controls, Housing
.
.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.