Audi Q7 2007 Repair Manual page 77

♦ Crankshaft Socket - T40058-
♦ Engine Support - Basic Set - T40091-
♦ Engine Support - Supplement Kit - T40093A-
♦ Gearbox Support - T40173-
Removing
Note
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
Refer to ⇒ "8 Repair Information", page 9
♦
with respect to the correctness of information in this document. Copyright by AUDI AG.
Refer to
♦
⇒ "8.3 Transmission, Clean Working Conditions", page 12
– Remove the particulate filter. Refer to ⇒ Engine Mechanical;
Rep. Gr. 26 .
– Remove the air filter housing. Refer to ⇒ Fuel Injection and
Glow Plug; Rep. Gr. 23 ; Air Filter .
– Remove the rear driveshaft. Refer to ⇒ Transfer Case 0BU,
Front Final Drive 0BM, 0C1 and 0BN, Rear Final Drive 0BP;
Rep. Gr. 39 .
– Remove the front driveshaft. Refer to ⇒ Transfer Case 0BU,
Front Final Drive 0BM, 0C1 and 0BN, Rear Final Drive 0BP;
Rep. Gr. 39 .
– Remove the left coolant pipe from the transmission. Refer to
⇒ Engine Mechanical; Rep. Gr. 19 ; Coolant Pipes .
– Remove the upper left coolant pipes from the transmission.
Refer to ⇒ Engine Mechanical; Rep. Gr. 19 ; Coolant Pipes .
– Remove the starter. Refer to ⇒ Electrical Equipment; Rep. Gr.
27 ; Starter .
8-Speed Automatic Transmission 0C8 - Edition 08.2017
.
.
Audi Q7 2007 ➤
6. Transmission, Removing and Installing
73