Audi Q7 2007 Repair Manual page 112

Audi Q7 2007 ➤
8-Speed Automatic Transmission 0C8 - Edition 08.2017
– Remove the ATF lines from the transmission.
– Attach a hose to one transmission ATF pipe/thermostat and
secure it with a hose clamp. Hang the other end of the hose
in a suitable container.
– Clear the ATF pipe with compressed air.
– Connect the hose to the other ATF pipe and repeat the pro‐
cedure.
– Coat the O-ring with ATF.
– Install the ATF pipes to the ATF cooler. Refer to
⇒ "9.3 ATF Pipes and ATF Cooler, Removing and Installing",
page 102
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
108
Rep. Gr.37 - Controls, Housing