Accelerator Pedal Mechanism; Overview - Accelerator Pedal Module; Accelerator Pedal Module With Throttle Position Sensors, Removing And Installing - Audi Q7 2007 Repair Manual

Audi Q7 2007 ➤
Fuel Supply System - Edition 10.2018
5

Accelerator Pedal Mechanism

⇒ "5.1 Overview - Accelerator Pedal Module", page 68
⇒ "5.2 Accelerator Pedal Module with Throttle Position Sensors,
Removing and Installing", page 68
5.1

Overview - Accelerator Pedal Module

1 - Bolt
❑ 10 Nm
2 - Accelerator Pedal Module
❑ With Accelerator Pedal
Position Sensor - G79-
and Accelerator Pedal
Position Sensor 2 -
G185- .
❑ Removing and instal‐
ling. Refer to
⇒ "5.2 Accelerator Ped‐
al Module with Throttle
Position Sensors, Re‐
moving and Installing",
page 68 .
❑ Perform after the first
kick-down adaptation in
Guided Functions
Vehicle Diagnostic
Tester- .
3 - Connector
4 - Bolt
❑ 10 Nm
5 - Lower Driver Side Instru‐
ment Panel Cover Mount
5.2 Accelerator Pedal Module with Throttle
Position Sensors, Removing and Instal‐
ling
Removing
– Remove the driver side lower instrument panel cover. Refer to
⇒ Body Interior; Rep. Gr. 68 .
68
Rep. Gr.20 - Fuel Supply
. -
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.