Audi Q7 2007 Repair Manual page 60

Audi Q7 2007 ➤
8-Speed Automatic Transmission 0C8 - Edition 08.2017
Installing
• Selector lever in "S".
– Unclip the guide for the emergency release lever in the direc‐
tion of -arrow-.
– Remove the emergency release lever -arrow- upward.
Note
The operating lever -1- for the Shift Lock Solenoid - N110- moves
into its installed position when the emergency release lever is
pulled up.
– At the same time, position the Shift Lock Solenoid - N110- into
the guide at an angle.
– Push the Shift Lock Solenoid - N110- into the guide until it
clicks.
• The ball head -2- on the Shift Lock Solenoid - N110- must fit
into the operating lever on the selector mechanism.
– Connector the connector -1-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
56
Rep. Gr.37 - Controls, Housing