Audi Q7 2007 Repair Manual page 79

– Control the crankshaft using the -T40058- to loosen the torque
converter bolts.
Caution
Danger of camshaft timing chain jumping off.
♦ When mounting, turn the crankshaft only in the direction
of engine rotation -arrow-.
– Remove the cover -2-.
– Rotate each crankshaft 120° in the direction of engine rotation
and remove the 6 torque converter bolts -1- in the opening for
the starter.
– Remove the engine/transmission connecting bolts -3 to 10-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Mount the -10-222A- on the fender bolting edge as illustrated.
• The -3033- spindles are in the back.
– Engage the spindle carabiner hook into the rear engine lifting
eyes.
8-Speed Automatic Transmission 0C8 - Edition 08.2017
Audi Q7 2007 ➤
6. Transmission, Removing and Installing
75