Audi Q7 2007 Repair Manual page 74

Audi Q7 2007 ➤
8-Speed Automatic Transmission 0C8 - Edition 08.2017
– Insert the -T40058- guide pins as follows:
• The large diameter -arrow 1- faces the engine.
• The small diameter -arrow 2- faces the adapter.
– Control the crankshaft with the -T40058- and an angled
wrench to loosen the drive plate bolts.
Caution
Danger of camshaft timing chain jumping off.
♦ When mounting, turn the crankshaft only in the direction
of engine rotation -arrow-.
– Remove the cover -2- forward.
– Rotate each crankshaft 120° in the direction of engine rotation
and remove the 6 torque converter bolts -1- in the opening for
the starter.
– Remove the engine/transmission connecting bolts -3 to 11-.
70
Rep. Gr.37 - Controls, Housing
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.