Selector Lever And Multifunction Transmission Range Switch F125; Overview - Selector Lever, Multifunction Transmission Range Switch F125 - Audi Q7 2007 Repair Manual

Audi Q7 2007 ➤
8-Speed Automatic Transmission 0C8 - Edition 08.2017
2 Selector Lever and Multifunction
Transmission Range Switch - F125-
⇒ "2.1 Overview - Selector Lever, Multifunction Transmission
Range Switch F125 ", page 122
⇒ "2.2 Multifunction Transmission Range Switch F125 , Remov‐
ing, Installing and Adjusting", page 123
⇒ "2.3 Selector Lever, Removing and Installing", page 126
⇒ "2.4 Selector Shaft Seal, Removing and Installing, Left",
page 128
⇒ "2.5 Selector Shaft Seal, Removing and Installing, Left",
page 129
2.1 Overview - Selector Lever, Multifunction Transmission Range Switch -
F125-
1 - Nut
❑ 12 Nm
2 - Cover
3 - Nut
❑ 7 Nm
4 - Lock Washer
❑ Replace if damaged
5 - Seals
6 - Bolt
❑ 6 Nm
7 - Multifunction Transmission
Range Switch - F125-
❑ Removing, installing
and adjusting. Refer to
⇒ "2.2 Multifunction
Transmission Range
Switch F125 , Remov‐
ing, Installing and Ad‐
justing", page 123
8 - Right Selector Shaft Seal
❑ Removing and instal‐
ling. Refer to
⇒ "2.5 Selector Shaft
Seal, Removing and In‐
stalling, Left",
page 129 .
9 - Selector Shaft
10 - Left Selector Shaft Seal
❑ Removing and instal‐
ling. Refer to
⇒ "2.4 Selector Shaft
Seal, Removing and In‐
stalling, Left", page 128
11 - Selector Lever
❑ The illustration does not represent the version in the vehicle.
❑ Removing and installing. Refer to
122
Rep. Gr.38 - Gears, Hydraulic Controls
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
.
.
⇒ "2.3 Selector Lever, Removing and Installing", page 126 .