Audi Q7 2007 Repair Manual page 123

– Disconnect the connector -arrow-.
– Carefully disconnect the connector in the direction of
-arrows-.
– Remove the bolt -arrow- from the Transmission Fluid Tem‐
perature Sensor - G93- .
– Loosen the bolts -arrows- diagonally and remove the valve
body.
Installing
Install in reverse order of removal. Note the following:
– Attach valve body without force.
– Tighten the valve body bolts. Refer to
⇒ Fig. ""Valve Body - Tightening Specification and Se‐
quence"" , page 120
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
8-Speed Automatic Transmission 0C8 - Edition 08.2017
.
Audi Q7 2007 ➤
1. Oil Pan, Oil Screen and Valve Body
119