Selector Lever Handle; Overview - Selector Lever Handle - Audi Q7 2007 Repair Manual

Audi Q7 2007 ➤
8-Speed Automatic Transmission 0C8 - Edition 08.2017
3 Selector Lever Handle
⇒ "3.1 Overview - Selector Lever Handle", page 32
⇒ "3.2 Selector Lever Handle, Removing and Installing",
page 33
⇒ "3.3 Selector Lever Boot, Removing from Selector Lever Han-
dle", page 38
⇒ "3.4 Selector Lever Transmission Range Position Display Unit
Y26 , Removing and Installing", page 39
⇒ "3.5 Selector Lever Sensor System Control Module J587 with
Tiptronic Switch F189 , Removing and Installing", page 39
3.1

Overview - Selector Lever Handle

⇒ "3.1.1 Overview - Selector Lever Handle, for Vehicles through
MY 2012", page 32
⇒ "3.1.2 Overview - Selector Lever Handle, for Vehicles from MY
2013", page 33
3.1.1 Overview - Selector Lever Handle, for Vehicles through MY 2012
1 - Clamp
❑ For securing the selec-
tor lever handle to the
selector lever
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
❑ Refer to
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ "3.2 Selector Lever
Handle, Removing and
Installing", page 33
2 - Trim Ring
❑ Removing and instal-
ling. Refer to
⇒ "3.3 Selector Lever
Boot, Removing from
Selector Lever Handle",
page 38 .
3 - Selector Lever Handle
❑ Refer to
⇒ "3.2.1 Selector Lever
Handle, Removing and
Installing, Vehicles
through MY 2012", page
33
4 - Selector Lever Boot
❑ Refer to
⇒ "3.3 Selector Lever
Boot, Removing from
Selector Lever Handle",
page 38
5 - Selector Lever Transmis-
sion Range Position Display
Unit - Y26-
❑ Must not be removed to
remove selector lever
handle.
❑ Refer to
⇒ "3.4 Selector Lever
Transmission Range Position Display Unit Y26 , Removing and Installing", page 39
32
Rep. Gr.37 - Controls, Housing