Audi Q7 2007 Repair Manual page 131

Removing
– Remove the rear noise insulation -2-. Refer to ⇒ Body Exte‐
rior; Rep. Gr. 66 ; Underbody Trim Panels .
– Remove the selector lever cable heat shield bolts
-1, 3 and 4-.
Note
Ignore item -2-.
– Move the heat shield to the side.
– Remove ball head -1- on the selector lever cable from the se‐
lector shaft lever using the -80-200- .
Note
Ignore item -2-.
8-Speed Automatic Transmission 0C8 - Edition 08.2017
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2. Selector Lever and Multifunction Transmission Range Switch F125
Audi Q7 2007 ➤
127