Torque Converter, Checking; Torque Converter, Installing - Audi Q7 2007 Repair Manual

1.4

Torque Converter, Checking

– Check the hub on the converter for scoring -arrow-.
Note
Replace the torque converter if it is damaged.
1.5

Torque Converter, Installing

Special tools and workshop equipment required
♦ Depth Gauge - VAS6082-
Installing
– Press torque converter hub through shaft seal as far as first
stop.
– Lightly press torque converter inwards and turn until slots on
torque converter hub engage in drive lugs on ATF pump gear
and torque converter slides in a noticeable distance.
– The outer sealing lip on the shaft seal can fold inward when
the torque converter is being installed -arrow-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
8-Speed Automatic Transmission 0C8 - Edition 08.2017
Audi Q7 2007 ➤
17
1. Torque Converter