Audi Q7 2007 Repair Manual page 40

Audi Q7 2007 ➤
8-Speed Automatic Transmission 0C8 - Edition 08.2017
Note
Both the selector lever handle and the selector lever boot are re‐
moved together.
– Carefully pry out the selector lever boot on the side using the
-3409- -arrows-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove the locking button from the selector lever handle
-arrow- and secure it with a cable tie -A- or an assembly aid
-B-, as illustrated.
Note
The assembly aid -B- is already installed at the factory when a
new handle is ordered. Remove the assembly aid only after the
new handle is installed. This locking strap can be used again as
an assist tool.
– Fold the selector lever boot -2- upward and over the selector
lever handle -3-.
– Turn the locking ring all the way in the direction of -arrow-. The
markings -a and b- no longer line up.
– Remove the selector lever handle and selector lever boot
without touching the locking button -1-.
36
Rep. Gr.37 - Controls, Housing