Audi Q7 2007 Repair Manual page 78

Audi Q7 2007 ➤
8-Speed Automatic Transmission 0C8 - Edition 08.2017
– Remove the bolt -arrow-.
– Disconnect the connectors -1, 2 and 3-.
– Remove ball head -1- on the selector lever cable from the se‐
lector shaft lever using the -80-200- .
– Remove the bolts -2- and then remove the selector lever cable
from the transmission.
Note
Do not bend or kink the selector lever cable.
– Insert the -T40058- guide pins as follows:
• The large diameter -arrow 1- faces the engine.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
• The small diameter -arrow 2- faces the adapter.
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
74
Rep. Gr.37 - Controls, Housing