Audi Q7 2007 Repair Manual page 14

Audi Q7 2007 ➤
8-Speed Automatic Transmission 0C8 - Edition 08.2017
⇒ "2.3 Selector Mechanism, Performing Emergency Release",
page 29 .
Transmission
♦ Clean working conditions for the automatic transmission. Re‐
fer to
⇒ "8.3 Transmission, Clean Working Conditions", page 12
♦ Do not let the engine run or tow the vehicle when the oil pan
is removed or when there is no ATF in the transmission.
♦ With the transmission removed, secure the torque converter
so that it cannot fall out.
♦ Check installation dimension of torque converter before in‐
stalling transmission. Refer to
♦ When installing the transmission, make sure that the align‐
ment bushings are fitted correctly.
♦ When exchanging automatic transmission or components, all
fluid levels should be checked and corrected, if necessary.
Likewise, all lines must be cleaned. Capacities. Refer to
⇒ "5 Capacities", page 5
Catalog.
10
Rep. Gr.00 - General, Technical Data
⇒ , page 18 .
. Specifications. Refer to the Parts
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
.