Selector Lever Handle, Removing And Installing; Selector Lever Handle; Installing - Audi Q7 2007 Repair Manual

3.1.2 Overview - Selector Lever Handle, for Vehicles from MY 2013
1 - Selector Lever Transmis‐
sion Range Position Display
Unit - Y26-
❑ Refer to
⇒ "3.4 Selector Lever
Transmission Range
Position Display Unit
Y26 , Removing and In‐
stalling", page 39

2 - Selector Lever Handle

❑ With side locking button
❑ Refer to
⇒ "3.2.2 Selector Lever
Handle, Removing and
Installing, Vehicles from
MY 2013", page 35
3 - Selector Lever Boot
❑ Removing and installing
together with the selec‐
tor lever handle:
❑ Refer to
⇒ "3.2.2 Selector Lever
Handle, Removing and
Installing, Vehicles from
MY 2013", page 35
4 - Not for this vehicle
3.2 Selector Lever Handle, Removing and

Installing

⇒ "3.2.1 Selector Lever Handle, Removing and Installing, Vehi‐
cles through MY 2012", page 33
⇒ "3.2.2 Selector Lever Handle, Removing and Installing, Vehi‐
cles from MY 2013", page 35
3.2.1 Selector Lever Handle, Removing and
Installing, Vehicles through MY 2012
Special tools and workshop equipment required
♦ Hose Clip Pliers - VAG1275A-
Removing
– Move the selector lever into "N".
8-Speed Automatic Transmission 0C8 - Edition 08.2017
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi Q7 2007 ➤
33
3. Selector Lever Handle