Table 4-7 Basic Source-Measure Commands - Keithley SourceMeter 2600 Series Reference Manual

Series 2600 System SourceMeters Reference Manual
Basic source-measure commands
Table 4-7
more information on using these commands.
Table 4-7
Basic source-measure commands
smuX.measure.autorangei = smuX.AUTORANGE_ON
smuX.measure.autorangev = smuX.AUTORANGE_ON
smuX.measure.autorangei = smuX.AUTORANGE_OFF
smuX.measure.autorangev = smuX.AUTORANGE_OFF
smuX.measure.rangei = rangeval
smuX.measure.rangev = rangeval
reading = smuX.measure.i()
reading = smuX.measure.v()
reading = smuX.measure.iv()
reading = smuX.measure.r()
reading = smuX.measure.p()
smuX.source.autorangei = smuX.AUTORANGE_ON
smuX.source.autorangev = smuX.AUTORANGE_ON
smuX.source.autorangei = smuX.AUTORANGE_OFF
smuX.source.autorangev = smuX.AUTORANGE_OFF
smuX.source.func = smuX.OUTPUT_DCVOLTS
smuX.source.func = smuX.OUTPUT_DCAMPS
smuX.source.leveli = sourceval
smuX.source.levelv = sourceval
smuX.source.limiti = level
smuX.source.limitv = level
smuX.source.output = smuX.OUTPUT_ON
smuX.source.output = smuX.OUTPUT_OFF
smuX.source.rangei = rangeval
smuX.source.rangev = rangeval
smuX.sense = smuX.SENSE_LOCAL
smuX.sense = smuX.SENSE_REMOTE
* smuX = smua for the Model 2601/2611; smuX = smua (Channel A) or smub (Channel B) for the Model 2602/2612.
summarizes basic source-measure commands. See
*
Command
Return to
Enable current measure auto range.
Enable voltage measure auto range.
Disable current measure auto range.
Disable voltage measure auto range.
Set current measure range.
Set voltage measure range.
Request a current reading.
Request a voltage reading.
Request a current and voltage reading.
Request a resistance reading.
Request a power reading.
Enable current source auto range.
Enable voltage source auto range.
Disable current source auto range.
Disable voltage source auto range.
Select voltage source function.
Select current source function.
Set current source value.
Set voltage source value.
Set current limit.
Set voltage limit.
Turn on source output.
Turn off source output.
Set current source range.
Set voltage source range.
Local sense (2-wire).
Remote sense (4-wire).
Section 4 topics 2600S-901-01 Rev. A / May 2006
Basic Operation 4-15
Section 12 for
Description