Keithley SourceMeter 2600 Series Reference Manual page 370

12-96 Instrument Control Library
status.measurement.*
status.measurement.condition
status.measurement.enable
status.measurement.event
status.measurement.ntr
status.measurement.ptr
* = condition, enable, event, ntr or ptr
Attribute Measurement event status register set.
Usage Reads condition, enable, event, NTR and PTR registers:
measreg = status.measurement.condition
measreg = status.measurement.current_limit.enable
measreg = status.measurement.current_limit.event
measreg = status.measurement.current_limit.ntr
measreg = status.measurement.current_limit.ptr
Writes to enable, NTR and PTR registers:
status.measurement.enable = measreg
status.measurement.ntr = measreg
status.measurement.ptr = measreg
Set
0
status.measurement.VOLTAGE_LIMIT
status.measurement.VLMT
status.measurement.CURRENT_LIMIT
status.measurement.ILMT
status.measurement.READING_OVERFLOW
status.measurement.ROF
status.measurement.BUFFER_AVAILABLE
status.measurement.BAV
status.measurement.OUTPUT_ENABLE
status.measurement.OE
status.measurement.INSTRUMENT_SUMMARY
status.measurement.INST
measreg
To set bit B0 (VLMT), set
To set bit B1 (ILMT), set
To set bit B8 (BAV), set
To set more than one bit of the register, set
weights. For example, to set bits B0 and B8, set
2600S-901-01 Rev. A / May 2006
to one of the following values:
measreg
can also be set to the decimal weight of the bit to be set. Examples:
measreg
measreg
measreg
Return to
Series 2600 System SourceMeters Reference Manual
0
to 1 (2 ).
1
to 2 (2 ).
8
to 256 (2 ).
measreg
measreg
Section 12 topics
Clears all bits.
Sets VLMT bit (B0).
Sets VLMT bit (B0).
Sets ILMT bit (B1).
Sets ILMT bit (B1).
Sets ROF bit (B7).
Sets ROF bit (B7).
Sets BAV bit (B8).
Sets BAV bit (B8).
Sets OE bit (B11).
Sets OE bit (B11).
Sets INST bit (B13).
Sets INST bit (B13).
to the sum of their decimal
to 257 (1 + 256).