Keithley SourceMeter 2600 Series Reference Manual page 513

Table of Contents

SPEED SPECIFICATIONS

MAXIMUM SWEEP OPERATION RATES (operations per second) FOR 60Hz (50Hz):

A/D CONVERTER

TRIGGER ORIGIN

MAXIMUM SINGLE MEASUREMENT RATES (operations per second) FOR 60Hz (50Hz):

A/D CONVERTER

TRIGGER ORIGIN

MAXIMUM MEASUREMENT RANGE CHANGE RATE: >4500/second typical. When changing to or

from a range ≥1A, maximum rate is >2000/second typical.

MAXIMUM SOURCE RANGE CHANGE RATE: >400/second, typical.

MAXIMUM SOURCE FUNCTION CHANGE RATE: >500/second, typical.

EXTERNAL TRIGGER INPUT: The Digital I/O interface signals can be conﬁgured to behave as trigger

Input Latency (time from trigger input to start of measurement or source change):

<150µs, typical.

Input Jitter: <100µs, typical.

COMMAND PROCESSING TIME: Maximum time required for the output to begin to change follow-

ing the receipt of the smux.source.levelv or smux.source.leveli command. <1ms typical.

1. See the Speed Speciﬁcations Test Conditions Appendix in the Series 2600 Reference Manual for more information

regarding test conditions.

Speciﬁcations are subject to change without notice. Rev. B

Model 2601/2611 Rear Panel

System SourceMeter

Multi-Channel I-V Test Solutions

10000 (10000)

SOURCE MEASURE

SOURCE MEASURE

SOURCE MEASURE

Model 2602/2612 Rear Panel

SOURCE MEASURE

Show Quick Links

Chapters

Table of Contents