Keithley SourceMeter 2600 Series Reference Manual page 426

13-16 Factory Scripts
Waveform:
Return
Values:
Output
Data:
Example:
See Also: InitiatePulseTest,
2600S-901-01 Rev. A / May 2006
Series 2600 System SourceMeters Reference Manual
bias
ton
A Boolean flag. This flag will be true when the pulse was
f:
successfully configured, false when errors were encountered.
A string message. If the f flag is false, msg will contain an error
msg:
message. Otherwise, msg will contain a string indicating successful
configuration.
Pulsed voltage measurements are stored in the reading buffer specified by
the buffer input argument.
ConfigPulseIMeasureV(smua, 0, 5, 10, 0.001, 0.080, 1,
smua.nvbuffer1, 1)
Setup a pulse train that will use SourceMeter channel A. The pulse amplitude
will be 5A and will return to 0A after 1msec. The pulse will remain at 0A for 80
msec and the voltage limit will be 10V during the pulse. The pulse train will
consist of only 1 pulse and this pulse will be assigned a tag index of 1.
Return to
pulse
toff
InitiatePulseTestDual
Section 13 topics