Keithley SourceMeter 2600 Series Reference Manual page 67

Series 2600 System SourceMeters Reference Manual TSP Programming Fundamentals 2-15
Starting Test Script Builder
Make sure the SourceMeter is properly connected to the PC (see
nections," described earlier in this section) and it is turned on. On the PC desktop,
double-click the Test Script Builder icon to begin:
NOTE
Workspace Launcher – During the initial start-up of TSB, the Workspace
Launcher window will be displayed as shown below. This window will indicate the
directory path for the workspace. This is where projects and script files will be
stored. If you do not wish to see this window on subsequent power-ups, select
"Use this as the default and do not ask again." Click OK to continue start-up.
Note: See
Communications – When Test Script Builder opens, communications to the
SourceMeter will be closed. With communications closed, commands cannot be
sent to the SourceMeter. A script can be written using the Test Script Builder, but
it cannot be run. Communications with the SourceMeter are established by
"Opening
The Test Script Builder can also be started from the Windows
Start button on the task bar. For a default installation, follow
this menu path to start the Test Script Builder:
Start > Programs > Keithley Instruments > Test Script Builder
"Creating a new workspace" later in Section 2 to create additional workspaces.
communications."
Return to Section 2 topics 2600S-901-01 Rev. A / May 2006
"System con-