Keithley SourceMeter 2600 Series Reference Manual page 172

5-10 Sweep Operation
Pulse sweep functions
Functions for pulse sweeps are listed in
Table 5-3
Pulse sweep functions
Function
PulseIMeasureV(smu, bias, level, ton, toff, points)
smu
bias
level
ton
toff
points
PulseVMeasureI(smu, bias, level, ton, toff, points)
channel
bias
level
ton
toff
points
Custom sweep functions
Functions for list (custom) sweeps are listed in
Table 5-4
Custom sweep functions
Command
SweepIListMeasureV(smu, ilist, stime, points)
smu
ilist
stime
points
SweepVListMeasureI(smu, vlist, stime, points)
smu
vlist
stime
points
2600S-901-01 Rev. A / May 2006
Series 2600 System SourceMeters Reference Manual
Table
Define fixed source current pulse sweep:
Smu: smua for channel A or smub for channel B.
DC bias current level in amps.
On source value of the pulse in amps.
Pulse on time in seconds.
Pulse off time in seconds.
Number of pulse-measure cycles.
Define fixed source voltage pulse sweep:
Smu: smua for channel A or smub for channel B.
DC bias voltage level in volts.
On source value of the pulse in volts.
Pulse on time in seconds.
Pulse off time in seconds.
Number of pulse-measure cycles.
Define current list sweep:
Smu: smua for channel A or smub for channel B.
List of current values in amps.
Settling time (source-measure delay in seconds).
Number of points
Define voltage list sweep:
Smu: smua for channel A or smub for channel B.
List of voltage values in volts.
Settling time (source-measure delay in seconds).
Number of points
Return to Section 5 topics
5-3.
Description
Table 5-4.
Description
(≥2).
(≥2).