Keithley SourceMeter 2600 Series Reference Manual page 333

Series 2600 System SourceMeters Reference Manual
setup.recall
Function Recalls settings from a saved setup.
Usage
setup.recall(n)
n
Remarks For an
1 to 5, the unit recalls a user saved setup.
Details See "Remote operation
Example Recalls the user-setup at location 2:
setup.recall(2)
setup.save
Function Saves the present setup as a user-setup.
Usage
setup.save(n)
n
Remarks Numbers 1 through 5 are used to designate user-setup locations. When you save at
one of these locations, the previous setup at that location is overwritten.
Details See "Remote operation
Saves the present setup at location 5:
Example
setup.save(5)
Setup number to recall (0 to 5).
setting of 0, the unit recalls the factory default (reset) setup. For an
n
setups" in
Setup number to save (1 to 5).
setups" in
Return to
Instrument Control Library 12-59
Section 1.
Section 1.
Section 12 topics 2600S-901-01 Rev. A / May 2006
setting of
n