Keithley SourceMeter 2600 Series Reference Manual page 35

Series 2600 System SourceMeters Reference Manual
Bottom Row
LOAD
RUN
STORE
RECALL
TRIG
MENU
EXIT
ENTER
3 Range keys:
AUTO
4 Output control and LED status indicator:
OUTPUT ON/OFF
LED indicator
5 Rotary knob and CURSOR keys:
When in source edit, use CURSOR keys for cursor control and then rotate the knob to
change a source or compliance value. The rotary knob can also be used to enable or
disable the source edit mode.
When in a menu, use the CURSOR keys or rotary knob for menu item cursor control.
When displaying a menu value, use the CURSOR keys for cursor control and rotate the
knob to change the value. Pressing the knob opens a menu item, or selects a menu
option or value.
6 Display annunciators (not shown):
EDIT
ERR
REM
TALK
LSTN
SRQ
REL
FILT
AUTO
ARM
TRIG
* (asterisk)
Loads factory or user-defined scripts for execution.
Runs last selected factory or user-defined scripts.
Stores readings, source values, and timestamp values in one of two
internal buffers for later recall.
Recalls stored readings, source values, and timestamp values from either
of the two buffers.
Triggers readings.
Accesses the main menu for saving and recalling setups, selecting
remote interface, line frequency, self-tests, serial number and beeper
control.
Cancels selection, backs out of menu structure. Also used as a LOCAL
key to take the unit out of remote.
Accepts selection, moves to next choice or exits menu.
and Selects the next higher or lower source or measure range.
Enables or disables source or measure auto range.
Turns source output on or off.
Turns on when output is on.
Unit is in the source editing mode.
Questionable reading or invalid cal step.
Unit in remote mode.
Unit addressed to talk.
Unit addressed to listen.
Service request.
Relative mode enabled.
Analog filter or Averaging filter is enabled.
Auto source or measure range selected.
Unit armed and ready to run.
External triggering selected.
Readings being stored in buffer.
Return to Section 1 topics 2600S-901-01 Rev. A / May 2006
Getting Started 1-9