Keithley SourceMeter 2600 Series Reference Manual page 401

Series 2600 System SourceMeters Reference Manual
status.system2.*
status.system2.condition
status.system2.enable
status.system2.event
* = condition, enable or event
Attribute TSP-Link system2 data structure register set.
Usage Reads condition, enable and event registers:
enablereg = status.system2.condition
enablereg = status.system2.enable
enablereg = status.system2.event
Writes to enable register:
status.system2.enable = enablereg
Set
enablereg
0
or
1
or
1
status.system2.NODEn
• In an expanded system (TSP-Link), this attribute is used to read or write to the
Remarks
system2 node registers.
• Reading a system2 node register returns a numeric value whose binary equivalent
indicates which register bits are set. The bits of the system2 node register are
identified as follows:
Bit B0 – EXT bit
Bit B1 – Node 15
Bit B2 – Node 16
Bit B3 – Node 17
For example, assume value 9 is returned for the enable register. The binary
equivalent is 0000000000001001. This value indicates that bit 0 (EXT) and bit 3
(Node 17) are set.
• Assigning a value to the
a node bit of the system2 node enable register.
Details See "System Summary Event
Also see status.system.*, status.system3.*, status.system4.*,
Example Sets the extension bit of the system2 enable register:
status.system2.enable = status.system2.EXT
to one of the following values:
status.system2.EXTENSION_BIT
status.system2.EXT
Bit B4 – Node 18
Bit B5 – Node 19
Bit B6 – Node 20
Bit B7 – Node 21
status.system2.enable
Return to
Instrument Control Library 12-127
Clears all bits.
Sets EXT bit (B0).
Sets EXT bit (B0).
Sets a node bit (Bn);
Bit B8 – Node 22
Bit B9 – Node 23
Bit B10 – Node 24
Bit B11 – Node 25
Registers" in Appendix
status.system5.*
Section 12 topics
= 15 to 28.
n
Bit B12 – Node 26
Bit B13 – Node 27
Bit B14 – Node 28
Bit B15 – Not used
attribute sets the extension bit or
D.
2600S-901-01 Rev. A / May 2006