Keithley SourceMeter 2600 Series Reference Manual page 224

8-18 Source-Measure Concepts
V-Source operating boundaries
Model 2601/2602 V-Source operating boundaries
Figure 8-8
quadrant of operation is covered. Operation in the other three quadrants is similar.
Figure
Model 2601/2602 SourceMeter can output up to 6.06V at 3A, or 40.4V at 1A. Note
that when sourcing more than 6.06V, current is limited to 1A.
Figure
represents the maximum source value possible for the presently selected voltage
source range. For example, if on the 6V source range, the voltage source limit line
is at 6.3V. The current compliance limit line represents the actual compliance in
effect. See
aries that represent the operating limits of the SourceMeter for this quadrant of
operation. The operating point can be anywhere inside (or on) these limit lines.
The limit line boundaries for the other quadrants are similar.
2600S-901-01 Rev. A / May 2006
shows the operating boundaries for the V-Source. Only the first
8-8A shows the output characteristics for the V-Source. As shown, the
8-8B shows the limit lines for the V-Source. The voltage source limit line
"Compliance limit" earlier in this section. These limit lines are bound-
Return to
Series 2600 System SourceMeters Reference Manual
Section 8 topics