Keithley SourceMeter 2600 Series Reference Manual page 520

B-6 Error and Status Messages
Table B-2 (cont.)
Error summary
Error number
1403 RECOVERABLE
1404 RECOVERABLE
1405 RECOVERABLE
1406 RECOVERABLE
1500 RECOVERABLE
1501 RECOVERABLE
1502 RECOVERABLE
1503 RECOVERABLE
1504 RECOVERABLE
1600 RECOVERABLE
1800 RECOVERABLE
1801 RECOVERABLE
2000 RECOVERABLE
2001 RECOVERABLE
4900 RECOVERABLE
4901 RECOVERABLE
4903 RECOVERABLE
4904 SERIOUS
4905 SERIOUS
4906 SERIOUS
5001 FATAL
5003 SERIOUS
5004 SERIOUS
5005 SERIOUS
5007 SERIOUS
5008 SERIOUS
5009 SERIOUS
5010 SERIOUS
5011 SERIOUS
5012 SERIOUS
5013 SERIOUS
2600S-901-01 Rev. A / May 2006
Error level
Factory scripts lost
Invalid byte order
Invalid ASCII precision
Invalid data format
Invalid baud rate setting
Invalid parity setting
Invalid terminator setting
Invalid bits setting
Invalid flow control setting
Maximum GPIB message length exceeded
Invalid Digital Trigger Mode
Invalid Digital I/O Line
Flash download error
Cannot flash with error in queue
Reading buffer index %s is invalid
The maximum index for this buffer is %d
Reading buffer expired
ICX parameter count mismatch, %s (Line #%d)
ICX parameter invalid value, %s (Line #%d)
ICX invalid function id, %s (Line #%d)
SMU is unresponsive
Saved calibration constants corrupted
Operation conflicts with CALA sense mode
Value too big for range
Operation would exceed safe operating area of the instrument
Operation not permitted while output is on
Unknown sourcing function
No such SMU function
Operation not permitted while cal is locked
Cal data not saved - save or restore before lock
Cannot save cal data - unlock before save
Return to
Series 2600 System SourceMeters Reference Manual
Error Message
Appendix B topics