Keithley SourceMeter 2600 Series Reference Manual page 178

6-2 Range, Digits, Speed, Rel, and Filters
Overview
The documentation in this section provides detailed information on characteristics
and script programming for each of the following functions:
•
•
•
•
•
Range
The selected measurement range affects the accuracy of the measurements as
well as the maximum signal that can be measured. Note that dashed lines are
displayed (i.e., --.---- µA), to indicate that the previous measurement is not recent.
This usually happens when a change occurs such as selecting a different range.
Available ranges
Table 6-1
SourceMeters.
Table 6-1
Source and measurement ranges
Voltage Ranges
1. 10A range available only in pulse mode.
2600S-901-01 Rev. A / May 2006
Range
Digits
Speed
Rel
Filters
lists the available source and measurement ranges for the Series 2600
Model 2601/2602
Current Ranges
100mV 100nA
1V 1μA
6V 10μΑ
40V 100μΑ
1mA
10mA
100mA
1A
3A
Return to
Series 2600 System SourceMeters Reference Manual
Model 2611/2612
Voltage Ranges
200mV
2V
20V
200V
Section 6 topics
Current Ranges
100nA
1μA
10μΑ
100μΑ
1mA
10mA
100mA
1A
1.5A
1
10A