Keithley SourceMeter 2600 Series Reference Manual page 375

Series 2600 System SourceMeters Reference Manual
status.measurement.instrument.smuX.*
status.measurement.instrument.smuX.condition
status.measurement.instrument.smuX.enable
status.measurement.instrument.smuX.event
status.measurement.instrument.smuX.ntr
status.measurement.instrument.smuX.ptr
* = condition, enable, event, ntr or ptr
Attribute Measurement SMU event status register set.
Usage Reads condition, enable, event, NTR and PTR registers:
measreg = status.measurement.instrument.smuX.condition
measreg = status.measurement.instrument.smuX.enable
measreg = status.measurement.instrument.smuX.event
measreg = status.measurement.instrument.smuX.ntr
measreg = status.measurement.instrument.smuX.ptr
Writes to enable, NTR and PTR registers:
status.measurement.instrument.smuX.enable = measreg
status.measurement.instrument.smuX.ntr = measreg
status.measurement.instrument.smuX.ptr = measreg
Set
measreg
0
status.measurement.VOLTAGE_LIMIT
status.measurement.VLMT
status.measurement.CURRENT_LIMIT
status.measurement.ILMT
status.measurement.READING_OVERFLOW
status.measurement.ROF
status.measurement.BUFFER_AVAILABLE
status.measurement.BAV
measreg
To set bit B0 (VLMT), set
To set bit B1 (ILMT), set
To set bit B8 (BAV), set
To set more than one bit of the register, set
weights. For example, to set bits B0 and B8, set
to one of the following values:
can also be set to the decimal weight of the bit to be set. Examples:
measreg
measreg
measreg
Return to
Instrument Control Library 12-101
0
to 1 (2 ).
1
to 2 (2 ).
8
to 256 (2 ).
to the sum of their decimal
measreg
measreg
Section 12 topics 2600S-901-01 Rev. A / May 2006
smuX = smua or smub
Clears all bits.
Sets VLMT bit (B0).
Sets VLMT bit (B0).
Sets ILMT bit (B1).
Sets ILMT bit (B1).
Sets ROF (B7).
Sets ROF (B7).
Sets BAV (B8).
Sets BAV (B8).
to 257 (1 + 256).