Keithley SourceMeter 2600 Series Reference Manual page 390

12-116 Instrument Control Library
status.questionable.*
status.questionable.condition
status.questionable.enable
status.questionable.event
status.questionable.ntr
status.questionable.ptr
* = condition, enable, event, ntr or ptr
Attribute Questionable event status register set.
Usage Reads condition, enable, event, NTR and PTR registers:
quesreg = status.questionable.condition
quesreg = status.questionable.enable
quesreg = status.questionable.event
quesreg = status.questionable.ntr
quesreg = status.questionable.ptr
Writes to enable, NTR and PTR registers:
status.questionable.enable = quesreg
status.questionable.ntr = quesreg
status.questionable.ptr = quesreg
Set
0
status.questionable.CALIBRATING
status.questionable.CAL
status.questionable.OVER_TEMPERATURE
status.questionable.OTEMP
status.questionable.INSTRUMENT_SUMMARY
status.questionable.INST
quesreg
To set bit B8 (CAL), set
To set bit B12 (OTEMP), set
To set bit B13 (INST), set
To set more than one bit of the register, set
weights. For example, to set bits B8 and B12, set
2600S-901-01 Rev. A / May 2006
to one of the following values:
quesreg
can also be set to the decimal weight of the bit to be set. Examples:
quesreg
quesreg
Return to
Series 2600 System SourceMeters Reference Manual
8
to 256 (2 ).
12
to 4096 (2
quesreg
13
to 8192 (2 ).
quesreg
quesreg
Section 12 topics
Clears all bits.
Sets CAL bit (B8).
Sets CAL bit (B8).
Sets OTEMP bit (B12).
Sets OTEMP bit (B12).
Sets INST bit (B13).
Sets INST bit (B13).
).
to the sum of their decimal
to 4352 (256 + 4096).