Keithley SourceMeter 2600 Series Reference Manual page 301

Series 2600 System SourceMeters Reference Manual
display.getlastkey
Function Retrieves the keycode for the last pressed key.
Usage
key = display.getlastkey()
• This read-only function returns the keycode for the last pressed key.
Remarks
of the following values:
0 (display.KEY_NONE)
65 (display.KEY_RANGEUP)
67 (display.KEY_RELB)
68 (display.KEY_MENU)
69 (display.KEY_MODEA)
70 (display.KEY_RELA)
71 (display.KEY_RUN)
72 (display.KEY_DISPLAY)
73 (display.KEY_AUTO)
74 (display.KEY_FILTERB)
75 (display.KEY_EXIT)
76 (display.KEY_SRCB)
77 (display.KEY_FILTERA)
78 (display.KEY_STORE)
79 (display.KEY_SRCA)
80 (display.KEY_CONFIG)
81 (display.KEY_RANGEDOWN)
• A history of the keycode for the last pressed front panel key is maintained by the
Series 2600. When the instrument is powered-on, (or when transitioning from local
to remote), the keycode is set to
• The OUTPUT ON/OFF keys for SMU A and SMU B cannot be tracked by this
function.
• Pressing the EXIT/LOCAL key normally aborts a script. In order to use this function
with the EXIT key,
Details See "Sending
Also see display.sendkey,
Example On the front panel, press the MENU key and then send the following code:
key = display.getlastkey()
print(key)
Output:
display.locallockout
keycodes" on Section
display.locallockout
6.800000e+01
Return to
Instrument Control Library 12-27
82 (display.KEY_ENTER)
83 (display.KEY_MEASB)
84 (display.KEY_DIGITSB)
85 (display.KEY_RECALL)
86 (display.KEY_MEASA)
87 (display.KEY_DIGITSA)
90 (display.KEY_LIMITB)
91 (display.KEY_SPEEDB)
92 (display.KEY_TRIG)
93 (display.KEY_LIMITA)
94 (display.KEY_SPEEDA)
95 (display.KEY_LOAD)
97 (display.WHEEL_ENTER)
103 (display.KEY_RIGHT)
104 (display.KEY_LEFT)
114 (display.WHEEL_RIGHT)
(
0 display.KEY_NONE)
must be used.
14.
Section 12 topics 2600S-901-01 Rev. A / May 2006
returns one
key
.