Keithley SourceMeter 2600 Series Reference Manual page 128

3-12 DUT Test Connections
Figure 3-11
Safety shield for hazardous voltage using two 2601/2602 channels (>42V)
Figure 3-12
Connections for test circuit shown in
Model 2611/2612 safety shield
The maximum output voltage for a Model 2611/2612 channel is 200V, which is
considered hazardous and requires a safety shield
for the test configuration in
wire or larger for connections to safety earth ground and chassis.
2600S-901-01 Rev. A / May 2006
Series 2600 System SourceMeters Reference Manual
Figure 3-11
Figure 3-13 are shown in
Return to Section 3 topics
(Figure 3-13). The connections
Figure 3-14. Use #18AWG