Series 2600 System SourceMeters Reference Manual
Filter configuration menu
Press CONFIG and then FILTER to display the filter configuration menu:
•
•
Enabling filter
The filter is enabled by pressing the FILTER key. The FILT annunciator is on while
the filter is enabled. Pressing FILTER a second time disables filter.
Response time
The filter parameters have speed and accuracy trade-offs for the time needed to
display, store, or output a filtered reading. These affect the number of reading
conversions for speed versus accuracy and response to input signal changes.
AVERAGE-TYPE — Use this menu item to select filter type
(MOVING or REPEAT).
AVERAGE-COUNT — Use this menu item to specify filter count
(1 to 100 readings).
Return to
Range, Digits, Speed, Rel, and Filters
Section 6 topics
2600S-901-01 Rev. A / May 2006
6-13