Keithley SourceMeter 2600 Series Reference Manual page 388

12-114 Instrument Control Library
status.operation.user.*
status.operation.user.condition
status.operation.user.enable
status.operation.user.event
status.operation.user.ntr
status.operation.user.ptr
* = condition, enable, event, ntr or ptr
Attribute Operation user event register set.
Usage Reads condition, enable, event, NTR and PTR registers:
operreg = status.operation.user.condition
operreg = status.operation.user.enable
operreg = status.operation.user.event
operreg = status.operation.user.ntr
operreg = status.operation.user.ptr
Writes to condition, enable, NTR and PTR registers:
status.operation.user.condition = operreg
status.operation.user.enable = operreg
status.operation.user.ntr = operreg
status.operation.user.ptr = operreg
Set
0
status.operation.user.BIT0
status.operation.user.BIT1
status.operation.user.BIT2
status.operation.user.BIT3
status.operation.user.BIT4
status.operation.user.BIT5
status.operation.user.BIT6
status.operation.user.BIT7
status.operation.user.BIT8
status.operation.user.BIT9
status.operation.user.BIT10
status.operation.user.BIT11
status.operation.user.BIT12
status.operation.user.BIT13
status.operation.user.BIT14
operreg
To set user BIT0, set
To set user BIT4, set
To set user BIT11, set
To set more than one bit of the register, set
weights. For example, to set BIT0 and BIT4, set
2600S-901-01 Rev. A / May 2006
to one of the following values:
operreg
can also be set to the decimal weight of the bit to be set. Examples:
operreg
operreg
operreg
Return to
Series 2600 System SourceMeters Reference Manual
Clears all bits.
Sets user BIT0.
Sets user BIT1.
Sets user BIT2.
Sets user BIT3.
Sets user BIT4.
Sets user BIT5.
Sets user BIT6.
Sets user BIT
Sets user BIT
Sets user BIT
Sets user BIT
Sets user BIT
Sets user BIT
Sets user BIT
Sets user BIT
0
to 1 (2 ).
4
to 16 (2 ).
11
to 2048 (2 ).
operreg
operreg
Section 12 topics
to the sum of their decimal
to 17 (1 + 16).