Keithley SourceMeter 2600 Series Reference Manual page 349

Series 2600 System SourceMeters Reference Manual
• This function will start a measurement and return immediately. The measurements,
Remarks
as they are performed, are stored in a reading buffer (along with any ancillary
information also being acquired). If the instrument is configured to return multiple
readings where one is requested, the readings will be available as they are made.
• The
readings in respective buffers (current and then voltage are stored in separate
buffers).
• This function is an overlapped command. Script execution will continue while the
measurement(s) is made in the background. Attempts to access result values that
have not yet been generated will cause the script to block and wait for the data to
become available. The
measurement(s) to complete before continuing.
• If a given reading buffer contains any data, it will be cleared prior to taking any
measurements, unless the reading buffer has been configured to append data.
Details See "Reading
Also see smuX.nvbufferY, smuX.nvbufferY,
Starts background voltage measurements for SMU A:
Example
smua.measure.overlappedv(smua.nvbuffer1)
smuX.measure.overlappediv
waitcomplete
buffers" in Section
Return to
Instrument Control Library 12-75
function stores both current and voltage
function can also be used to wait for the
7.
waitcomplete
Section 12 topics 2600S-901-01 Rev. A / May 2006