Keithley SourceMeter 2600 Series Reference Manual page 262

11-2 Communications Interfaces
Overview
The documentation in this section provides detailed information on using
communications interfaces:
•
•
•
•
•
NOTE See
Selecting an interface
The Series 2600 SourceMeter supports two built-in remote interfaces:
•
•
You can manually select the GPIB or RS-232 interface, or have the unit
automatically select the interface (the default) by using the COMMUNICATIONS
menu accessed with the MENU key. The unit can only be remote to one interface
at a time. In auto-select, the unit will remote to the first interface on which it
receives a message. It will ignore the other interface until the unit is taken back to
local operation.
When the unit powers up, it will display the communication parameters of the
selected interface. If auto-selection is enabled, the unit will display the
communication parameters of both interfaces.
2600S-901-01 Rev. A / May 2006
Selecting an interface
GPIB operation
General bus commands
Front panel GPIB operation
RS-232 interface operation
Section 2 for more information on the GPIB and RS-232
communications interfaces. The TSP-Link is also a
communications interface. See
GPIB (General Purpose Interface Bus)
RS-232 interface
Return to
Series 2600 System SourceMeters Reference Manual
Section 9 for details.
Section 11 topics