Keithley SourceMeter 2600 Series Reference Manual page 536

D-8 Status Model
Status function summary
The following functions control and read the various registers.
Common status commands are listed in
included later in the section in command listings for the various register sets.
Table D-1
Status functions and registers
Type
System summary
Measurement event
Operation event
Questionable event
Standard event
1. * = '.ntr', '.ptr' and '.enable'; smuX = smua or smub.
2600S-901-01 Rev. A / May 2006
Function
status.reset
status.node_enable
status.request_enable
status.node_event
status.request_event
status.condition
status.measurement.*
status.measurement.instrument.smuX.*
status.measurement.instrument.*
status.measurement.voltage_limit.*
status.measurement.current_limit.*
status.measurement.buffer_available.*
status.measurement.reading_overflow.*
status.operation.*
status.operation.instrument.smuX.*
status.operation.instrument.*
status.operation.calibrating.*
status.operation.measuring.*
status.operation.user.*
status.questionable.*
status.questionable.instrument.smuX.*
status.questionable.instrument.*
status.questionable.calibration.*
status.questionable.over_temperature.*
status.standard.enable
Return to
Series 2600 System SourceMeters Reference Manual
Appendix C. Additional information is
1
Appendix D topics
(Table D-1).