Table 112: Wbm "Openvpn / Ipsec Configuration" Page - "Ipsec" Group - WAGO Compact Controller 100 Manual

WAGO I/O System Compact
751-9301 Compact Controller 100
"IPsec" Group
Table 112: WBM "OpenVPN / IPsec Configuration" Page – "IPsec" Group
Parameter
Current State
IPsec enabled
ipsec.conf
ipsec.secrets
Click the [Submit] button to apply a change.
To select a file on the PC, click the Choose file ... selection field.
To transfer the selected file from the PC to the product, click [Upload] button.
To transfer a file from product to PC, click the [Download] button.
The changes only take effect after the product restarts. For this purpose, use the
WBM reboot function. Do not switch off the product too early!
Explanation
The current status of the IPsec service is displayed.
stopped The service is disabled.
running The service is enabled.
Enable or disable the IPsec service.
Select an IPsec configuration file to be transferred
from PC to product or vice versa.
Select an IPsec configuration file to be transferred
from PC to product or vice versa.
Version 1.1.0, valid from FW Version 03.08.07(20)
Appendix 179
Manual